SPAR 2 - HEAD PULLEY PROTECTION
![](http://www.brunone-innovation.com/wp-content/uploads/2021/05/SPAR-2-Protection-des-angles-rentrant-Tambour-de-tete.png)
![](http://www.brunone-innovation.com/wp-content/uploads/slider2/SPAR2-Protectiondesanglesrentrant-Tambourdette-Photo3.jpeg)
![](http://www.brunone-innovation.com/wp-content/uploads/slider2/SPAR2-Protectiondesanglesrentrant-Tambourdette-Photo2.jpeg)
SPAR 2 - Protection des angles rentrant - Tambour de tête
SPAR2-Protectiondesanglesrentrant-Tambourdette-Photo3
SPAR2-Protectiondesanglesrentrant-Tambourdette-Photo2
![](https://www.brunone-innovation.com/wp-content/uploads/2021/03/certifie-ce.png)
![](https://www.brunone-innovation.com/wp-content/uploads/2021/03/made-in-france.png)
![](https://www.brunone-innovation.com/wp-content/uploads/2021/09/Patented-product.png)
![](https://www.brunone-innovation.com/wp-content/uploads/2021/10/Norme-Europeenne.jpg)
PROTECTION
SPAR 2 - Drive Pulley Protection
Our device is located just before the point where the belt comes into contact with the head pulley
The SPAR 2 is the essential protection for all belt conveyors.
- Products Features
- Video
- The SPAR 2 protects the nip point located at the precise point where the belt comes into contact with the conveyor head drum.
- Is made of two rigid polyurethane foam blocks that adjust to the shape of the belt
- is designed to provide long-lasting protection if properly installed
- Can accommodate belts from 500 mm to 1600 mm wide ( max φ >650 mm please contact us)